0xc0000005 windows 10 ham radio deluxe stopped working

Lets add a second repeater, and call it repeater 2. As you continue to travel, you will eventually lose coverage from that repeater. You are traveling on the fringe of repeater 1. That has Talk Group A in static operation. How it works is lets say you are on a local repeater which we will call repeater 1.

It requires MULTIPLE repeaters and the repeater MUST have beacon enabled where the repeater sends a signal for reference on the mobile unit to judge whether or not to switch to the new system. Q: I have an 868, can I put THAT codeplug into the 878?Ī: Yes, there will be different options you need to verify before loading but the core codeplug will drop right in.Ī: Roaming is a holdover from commercial systems. Q: I have an 878 which does not give me the option of VFO, or DigiMoni, or any other amateur functions- HELP!!!Ī: Read the radio, go to optional setting-other and select Amateur Mode here:

Rotate the Channel Knob counter clockwise to set it to 'MODE 0000'. SO do the following to fix it:ġ) turn off the radio, and turn back on while holding the PTT and Number 1 key on the Keypad (NOT the P1 button).Ģ) when the screen says 'TEST MODE' release the buttons and then the screen will show 'MODE 0010'. The bad side is a MODE 0010 radio will not take a MODE 0000 codeplug. But by FCC rules they had to start being locked so non Ham customers had to have a two way shop program them, and general users could not make changes to the programming. The ones we have seen until recenly came over in 'MODE 0000', which allowed 136-174 and 400-480 rx and tx. This makes it so the keyboards do NOT have to be locked as soon as you receive them. How do I fix it?Ī: All the new radios are coming in 'MODE 0010' which is ham band tx only. So I'm guessing that Omnirig is working correctly, but I'm at a loss as to why Omnirig and SDRuno can't talk to each other.Q: I just received my radio and tried to load a codeplug I was given and I get 'Band Error'. I get error messages saying they can not connect to the rig because the port is busy.

However if I close SDRuno and Omnirig, programs like Ham Radio Deluxe and WSJTX take control and work just fine with the rig.Īlthough, if Omnirig is open, neither of those programs will take control of the rig. At the bottom of that window, under the ENABLE button it says 'Can't connect to OmniRig server'. However, when I go to 'MAIN' window and click on Settings>ORIG it shows the RIG1 and RIG2 types. Then went to the settings>ORIG and made sure RIG1 was selected, just like in the video. Then go to the RX control screen and made sure the RSYN1 button is turned on. So I updated their values to match both the rig and omnirig's values. Only things on my end that were different in the port settings in device manager for the enhanced port (COM 3) were the 'bits per second' and 'stop bits'. Ok, I followed the directions given in the video.

0xc0000005 windows 10 ham radio deluxe stopped working